GALILEO WEEDING MACHINE 75
Less is More
The weeding revolution is born here! Thanks to the GALILEO WM 75, every printer’s dream comes true: no more skiving knives. Endless hours of manual work and frequent errors are finished!
The GALILEO WM 75 has automated the only working phase that still today is performed by hand throughout the world: the removal of waste from pre-spaced adhesive films, the micro-weeding!
The GALILEO WM 75 has automated the only working phase that still today is performed by hand throughout the world: the removal of waste from pre-spaced adhesive films, the micro-weeding!
ADVANTAGES
CORE SPECIFICATIONS
- Repeatability: +- 0.05 mm
- Position accuracy: +- 0.1 mm
- Typical producivity for internal/small weed removal: 1.5 seconds per piece
- Maximum speed: 70 m/min
- Max acceleration 1.5 g
- Operating room temperature: from 18°C to 25°C
- Electrical requirements: ac 3ph+n+gnd 200/400V 50/60Hz 32A
- Maximum dimension of the sheet cm 75 x 75
- Operator Panel completed with a dedicated pc
- Auxiliary Front Operator Console
- N°1 vacuum table with 16 zones
- N° 1 vacuum side channel pumps (4,0 kW)
- Galileo Software Removal Tool with protected hardware key
- N°3 Gripper Sets small-medium-large (2 for each type, totally 6 grippers)
- Case with spares’ set
ROOM CARACTERISTICS
- Power supply 380 V, 3P+T preferably stabilized. In order to obtain better performances and stability of the system we recommend the installation of a UPS (not included), max power. 20 kW, circuit breaker 40 A
- Aspiration pump supply 400 V, 50 Hz, 3P + T – Protection 7.5 A
- Necessary compressed air 7 bar
- Useful area GALILEO WM75: 3550 X 1500 mm
- Area needed: 4300 x 2550 mm
- Safety distances around the machine: 60 cm
- Weight: 1600 kilos
Want to know how we can help your business?
Got questions? Ideas? Leave your phone number & our specialist will contact you.
